MB Slot
FLB2 22.000 rpm Closed Can Motor
Motor FLB2 long can, both sides closed, 22.000rpm @12 Volt and 380 g*cm of torque The diffe..
14.00 € Ex Tax: 11.48 €
FLB2 22.000 rpm Opened Can Motor
Motor FLB2 long can, both sides opened, 22.000rpm @12 Volt and 380 g*cm of torque The diffe..
14.00 € Ex Tax: 11.48 €
FLB3 32.000 rpm Opened Can Motor
Motor FLB3 long can, both sides opened, 32.000rpm @12 Volt and 459 g*cm of torque Ferrite m..
13.50 € Ex Tax: 11.07 €
FLB5 49.500 rpm Opened Can Motor
Motor FLB5 long can, both sides opened, 49.500rpm @12 Volt and 657 g*cm of torque Ferrite m..
13.50 € Ex Tax: 11.07 €
Front Aluminium Hubs 17.25x8.5mm
Extralight (0.75gr) 3/32'' Front Hubs. Fixed with Exagonal Grub Screws M2. ..
10.70 € Ex Tax: 8.77 €
Green Potentiometer Knob
MB Slot potentiometer knob with 6 mm shaft, screw fastening, green pointer and cap...
2.50 € Ex Tax: 2.05 €
Guide 2014 Screw Fitting
New guide with screw to fix to the chassis and 2 grub screws M 2.5 x 2.5 mm to fix to the pick-up..
3.00 € Ex Tax: 2.46 €
Guide and Suspension Springs
MB Slot guide and suspension springs. Pack of 8 springs. ..
2.80 € Ex Tax: 2.30 €
Hard Copper Braid 1 meter
Hard copper braid, 1 meter. Suggested braids on the MB Slot FR4 1:24 chassis. ..
3.90 € Ex Tax: 3.20 €
Heating Resistor 30w
Flexible silicon heating resistor 30 watt with double-sided tape, cm 16x6. Attached to a meta..
19.06 € Ex Tax: 15.62 €
Heatsink Heat and Protection for Motors
Heatsink heat and protection for motors, thickness: 0.1mm ..
3.70 € Ex Tax: 3.03 €
Indipendent Front Axles Kit
Indipendent Front Axles KitUse with MB Slot Hubs 19015. ..
4.90 € Ex Tax: 4.02 €
Inline Steel Pinion 10 Teeth 5.5mm
Inline Steel Pinion 10 Teeth 5.5mm Pack of 2 pinions ..
3.30 € Ex Tax: 2.70 €
Inline Steel Pinion 8 Teeth 5.5mm
MB Slot inline steel pinion 8 teeth 5.5mm diameter. Pack of 2 pinions. ..
3.12 € Ex Tax: 2.56 €
Inline Steel Pinion 9 Teeth 5.5mm
MB Slot inline steel pinion 9 teeth 5.5mm diameter. Pack of 2 pinions. ..
3.30 € Ex Tax: 2.70 €
Kit Short Suspension without spring
Whit this system is possible to apply suspension in GT cars' motor mount with low body ..
3.12 € Ex Tax: 2.56 €
Liquid for Breaking-In Motors
Connect the motor to a battery (3V max) and completely dipping it in the liquid for a variable ti..
9.50 € Ex Tax: 7.79 €
Low Ball Bearings for Crown's Stopper MB 17020
MB Slot Low Ball Bearings for use with 3/32 axle ..
7.20 € Ex Tax: 5.90 €
Low Friction Guide Screw Fitting
MB Slot low friction guide screw fitting. Pack of 2 guides ..
3.40 € Ex Tax: 2.79 €